0.3m Daisy Chain Cable

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

10 meters (32.8 feet) long

10 meters (32.8 feet) long

No description available.

No description available.

10m Power & Raynet Cable

10m Remote Antenna Kit

- Panels with meters include a toggle switch to monitor voltage on up to three battery banks - Includes 4205-Square Format Label Set

- Available with voltmeters and ammeters - Panels with meters include a toggle switch to monitor voltage on up to three battery banks - Includes 4205-Square Format Label Set

Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices - Charges at the speed required by specific devices - Internal filtering for reduced electronic interference - Over temperature protection - Protective dust cap keeps debris and moisture out - Potted for the harsh marine environment - Mounts in a common 1-1/8" hole

Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. - Fits in same mounting hole as a traditional 12 Volt outlet - Compatible with most mobile devices including Apple® products - Protective dust cap with tether keeps dust and spray from shortening the life of the charger - Potted for the harsh marine environment - 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices

Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. - Fits in same mounting hole as a traditional 12 Volt outlet - Compatible with most mobile devices including Apple® products - Protective dust cap with tether keeps dust and spray from shortening the life of the charger - Potted for the harsh marine environment - 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices

Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices - Charges at the speed required by specific devices - Internal filtering for reduced electronic interference - Over temperature protection - Protective dust cap keeps debris and moisture out - Potted for the harsh marine environment - Mounts in an existing contura switch aperture

No description available.

- Backlight label positions - Red "Reverse Polarity" LEDs installed - Green "Power Available" LEDs installed - Lockout slides prevent connecting multiple AC sources simultaneously

- Backlight label positions - Red "Reverse Polarity" LEDs installed - Green "Power Available" LEDs installed - Lockout slides prevent connecting multiple AC sources simultaneously

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

- All circuit label positions are backlit - “ON” indicating LEDs installed in all circuit positions - Includes 4206—Square Format Label Set

No description available.

- Extra positions available for double pole A-Series Toggle Circuit Breakers - Red reverse polarity indicating LED - All neutral and safety ground buses installed - Label backlighting pre-installed - All LEDs installed - Maximum panel Amperage - 50 Amperes

- Switches between two 120V AC shore power sources and one 240V AC source to two 120V AC load groups - Red reverse polarity LED indicators - Green power available LED indicators

No description available.

No description available.

- Switches two 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

- Switches three 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

- Switches two 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

Adjustable – stainless steel: 280 x 110 mm – 180 x 70 mm

Ø 90 – 120 – 150 – 180 mm

Open: Ø 40 mm Base: 62 x 33 mm Center projection: 55 mm

Open: Ø 38 mm Base: 52 x 48 mm Center Projection: 50 mm

End: Ø 40 mm Base: 62 x 33 mm Center projection: 55 mm

End: Ø 38 mm Base: 52 x 48 mm Center Projection: 50 mm

Pedestal only

No description available.