Control a stereo or other device remotely from a phone or tablet in the cockpit USB 2.0 data/voltage port easily mounts at the dash with a prewired connecting cable which conveniently plugs directly into the USB on the stereo. - Protective dust cap with tether keeps out dust and spray

Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices - Charges at the speed required by specific devices - Internal filtering for reduced electronic interference - Over temperature protection - Protective dust cap keeps debris and moisture out - Potted for the harsh marine environment - Mounts in a common 1-1/8" hole

Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. - Fits in same mounting hole as a traditional 12 Volt outlet - Compatible with most mobile devices including Apple® products - Protective dust cap with tether keeps dust and spray from shortening the life of the charger - Potted for the harsh marine environment - 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices

Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. - Fits in same mounting hole as a traditional 12 Volt outlet - Compatible with most mobile devices including Apple® products - Protective dust cap with tether keeps dust and spray from shortening the life of the charger - Potted for the harsh marine environment - 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices

Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices - Charges at the speed required by specific devices - Internal filtering for reduced electronic interference - Over temperature protection - Protective dust cap keeps debris and moisture out - Potted for the harsh marine environment - Mounts in an existing contura switch aperture

The Socket and Dual USB Charger module integrates one 12V DC Socket and one Dual USB Charger. The dual USB socket will provide 2.1 amps of total output power which easily charges smart phones and tablets, including Apple™ iPhone and iPad products. The 12V socket is idea for charging devices or powering a 12 volt accessory such as a spotlight. The module is available as individual panel (part number 1478) or as an option in the Custom 360 Panel program. Features - Dust caps keep unwanted material our of charging sockets - Manufactured with corrosion-resistant materials - Nickel plated copper alloy used for all current carrying components - Part of the 360 Panel System

- Mounts on any Blue Sea Systems" Contura Switch - Constructed of thermal plastic polycarbonate with a hard nylon surface overlay - For each embedded LED there is a corresponding number of lenses

Now with integrated charging - Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate - Designed for 12 or 24V DC systems - Watertight mounting gasket - ON indicating LEDs embedded in all switches - 8421 and 8521 include a Small Format Label Set 8217 (Gray) or 8214 (Black) - 8121 include a Large Format Label Set 8030

- Now with integrated charging - Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate - Designed for 12 or 24V DC systems - Watertight mounting gasket - ON indicating LEDs embedded in all switches - 8421 and 8521 include a Small Format Label Set 8217 (Gray) or 8214 (Black) - 8121 include a Large Format Label Set 8030

Intelligent device recognition maximizes charge rate for phones, tablets, or other mobile devices - Ideal for golf carts and other 48V systems - Spring-hinged lid keeps debris and moisture out - Charges at the speed required by specific devices - Internal filtering for reduced electronic interference - Over temperature protection - Potted for the harsh marine environment - Mounts in an existing contura switch aperture

Now with integrated charging - Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate - Designed for 12 or 24V DC systems - Watertight mounting gasket - ON indicating LEDs embedded in all switches - 8421 and 8521 include a Small Format Label Set 8217 (Gray) or 8214 (Black) - 8121 include a Large Format Label Set 8030

The Mini Automatic Charging Relay (M-ACR) is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines. Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit during engine cranking, protecting the house circuit from voltage sags and spikes. The compact design allows for three mounting styles: surface, rear, or panel mount. The M-ACR is also available as a module in a Custom 360 Panel. Features - Senses charging on two battery banks - Pull off and snap on insulating cover - LED indicates ACR status - 1 ∕4" x .032" male quick connect terminal for ground - 7∕ 16" (11 mm) stud length to accept multiple cable terminals - Waterproof – rated IP67 for temporary immersion

500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine - Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing - Includes ML-Series Remote Control Contura Switch PN 2146 - Automatically manages the charging of two large battery banks - Allows paralleling of battery banks for emergency starting - 500 Ampere continuous rating to support high-output alternators - Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state - Dual sensing—senses charge on both battery banks - Start Isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics - Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output - Senses charging on two battery banks - LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation - 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance - 7/8" (22mm) stud length accepts multiple cable terminals - Silver alloy contacts provide high reliability for switching live loads - Label recesses for circuit identification

500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine - Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing - Includes ML-Series Remote Control Contura Switch PN 2146 - Automatically manages the charging of two large battery banks - Allows paralleling of battery banks for emergency starting - 500 Ampere continuous rating to support high-output alternators - Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state - Dual sensing—senses charge on both battery banks - Start Isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics - Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output - Senses charging on two battery banks - LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation - 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance - 7/8" (22mm) stud length accepts multiple cable terminals - Silver alloy contacts provide high reliability for switching live loads - Label recesses for circuit identification

Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. - Pre-wired harness included in all panels for easy installation - Silicon breaker boots and gasket protects against water ingress - Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw - Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode - 12V DC only

Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. - Pre-wired harness included in all panels for easy installation - Silicon breaker boots and gasket protects against water ingress - Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw - Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode - 12V DC only

Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. - Pre-wired harness included in all panels for easy installation - Silicon breaker boots and gasket protects against water ingress - Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw - Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode - 12V DC only

Easy to install accessory panels include a 15A circuit breaker switch and a pre-wired harness. Panels offer customizable 12V charging and monitoring options. - Pre-wired harness included in all panels for easy installation - Silicon breaker boots and gasket protects against water ingress - Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw - Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode - 12V DC only